Cleaning, casting and picture-taking

[sci_starborne]

Straight to the workshop this morning, and finally managed to dig out the custom wax seal I made for Ash!
I had to modify it because last time I wasn’t happy with my own piss-poor engraving and due to the fact I didn’t reverse the text or images. So the stamped text came out backwards! D’oh!

It polished up pretty well with rotary tool and felt wheel though.

Also checked on the paw-pad castings. Was a bit worried since the part-A had settled out and I used a portion of the surface fluid by itself on the first run.
I’ve since scrawled “SHAKE BEFORE USE” on the side of the heated cabinet.
Regardless the elastomer seems to have set and cured pretty well. No areas of unmixed dye, and a glossy surface finish. I’m still going to give them another 24hrs before they go in the post though, just to be on the safe side. They should be fully hardened at 7 days, but they can be used an manipulated as-is.
Texture’s good too. Feels very natural.

Bit miffed that TOMPS haven’t gotten back to me yet regarding the order cockup, where they sent me Shore-60 instead of 80. I had intended to make up the “tire-tough” footpads with the new 4″ wide velcro embedded in them, and strap them to the bottoms of my shoes to test them at tomorrows LondonFur meet.
Really I should have checked the order contents when it arrives, but I assumed that they were correct because I’d been told the 80 was in a larger set than the 40, due to new suppliers. There were two sizes in there, so I assumed. I should have asked for the product numbers, rather than the descriptions.
It’ll get sorted eventually.

So, spent a little while here, setting up the ghetto Ikea light-box, and getting some much improved publicity shots of my works.
I really need some bigger, brighter lights though. Maybe my welding halogen..
Also depth-of-field is a bit messed up in some. Should be resolved with more light and using Macro shots, rather than regular with zoom.

Some unedited, resized shots below cut..

Read the rest of this entry »

Mirrored from The blog-hub for Peter "Sci" Turpin.