sci_starborne: Sign of the Fox (Default)
Friday, August 3rd, 2012 01:00 am

Mirrored from The blog-hub for Peter "Sci" Turpin.

Tags:
sci_starborne: Sign of the Fox (Default)
Thursday, August 2nd, 2012 01:00 am

Mirrored from The blog-hub for Peter "Sci" Turpin.

Tags:
sci_starborne: Sign of the Fox (Default)
Wednesday, August 1st, 2012 01:00 am

Mirrored from The blog-hub for Peter "Sci" Turpin.

Tags:
sci_starborne: Sign of the Fox (Default)
Tuesday, July 31st, 2012 01:00 am

Mirrored from The blog-hub for Peter "Sci" Turpin.

Tags:
sci_starborne: Sign of the Fox (Default)
Monday, July 30th, 2012 01:00 am

Mirrored from The blog-hub for Peter "Sci" Turpin.

Tags:
sci_starborne: Sign of the Fox (Default)
Sunday, July 29th, 2012 01:00 am

Mirrored from The blog-hub for Peter "Sci" Turpin.

Tags:
sci_starborne: Sign of the Fox (pic#181874)
Saturday, July 28th, 2012 03:29 pm

Productivity is still rather spotty, but I am getting things done in dribs and drabs. I think all current “projects” stuff is in the workshop again now, and a big pile has been thrown out.

The biggest single thing is commiting my mind to doing just one thing for a while, then I can get on with it.

Mirrored from The blog-hub for Peter "Sci" Turpin.

sci_starborne: Sign of the Fox (Default)
Saturday, July 28th, 2012 01:00 am

Mirrored from The blog-hub for Peter "Sci" Turpin.

Tags:
sci_starborne: Sign of the Fox (pic#181874)
Friday, July 27th, 2012 02:07 am

Sun and warmth helps productivty.

 

Large ammount of scrap cleared out, several projects progressed, progress made on outstanding orders.

Due to the delays caused by this recent state, I think I’ll be offering a discount to those affected by way of an apology.

Mirrored from The blog-hub for Peter "Sci" Turpin.

sci_starborne: Sign of the Fox (Default)
Friday, July 27th, 2012 01:00 am

Mirrored from The blog-hub for Peter "Sci" Turpin.

Tags:
sci_starborne: Sign of the Fox (Default)
Thursday, July 26th, 2012 01:00 am

Mirrored from The blog-hub for Peter "Sci" Turpin.

Tags:
sci_starborne: Sign of the Fox (Default)
Wednesday, July 25th, 2012 01:00 am

Mirrored from The blog-hub for Peter "Sci" Turpin.

Tags:
sci_starborne: Sign of the Fox (Default)
Tuesday, July 24th, 2012 01:00 am

Mirrored from The blog-hub for Peter "Sci" Turpin.

Tags:
sci_starborne: Sign of the Fox (Default)
Monday, July 23rd, 2012 01:00 am

Mirrored from The blog-hub for Peter "Sci" Turpin.

Tags:
sci_starborne: Sign of the Fox (Default)
Sunday, July 22nd, 2012 01:00 am

Mirrored from The blog-hub for Peter "Sci" Turpin.

Tags:
sci_starborne: Sign of the Fox (pic#181874)
Saturday, July 21st, 2012 11:12 pm

Woke up on time.

Helped mum collect a metal sofa-bed.

Made some fantastic pork crackling.

Got 4th section of the fence up (final one tomorrow).

Got access-ramp frame made.

Got base of vacuum-former base half built (rest tomorrow after glue dries).

Drank a lot of tea. All three meals too.

 

Bed shortly after cuppa and a quick shower to remove creosote smell and sawdust.

Mirrored from The blog-hub for Peter "Sci" Turpin.

sci_starborne: Sign of the Fox (Default)
Saturday, July 21st, 2012 01:00 am

Mirrored from The blog-hub for Peter "Sci" Turpin.

Tags:
sci_starborne: Sign of the Fox (pic#181874)
Friday, July 20th, 2012 11:36 pm

I’m aiming to finally build a wearable, and managed to find a cheap alternative to cutting a set of video glasses in two for a monocular. I got a broken analogue video camera off ebay that had a colour LCD viewfinder. It was a bit of a gamble that being analogue it would have simpler inputs than a digital camcorder, but it paid off. I received the camera today, pulled it apart and got it running on it’s own. 0.2A @5v with composite PAL input.

There’s a 4th pin on the connector though, in addition to Gnd, 5v and video. It’s marked “HD” on the viewfinder PCB, and I traced it back to the IC where (after going through a SMD transistor) connects to the “HD” pin 30 on the controller IC.

The datasheet for the IC expands it a little that the HD pin is for “HD pulse output”, but I can’t find anywhere that explicitly states what the HD pulse is.

I’m *guessing* it’s something to do with the frame timing since the only other HD I can find in the sheet relates to “Horizontal Direction”.

The IC is a Sony CXA1854AR by the by.

The camera supplies the HD pin on the connector with 4.3v however, or at least seems to. I thought I tested it for voltage with the display disconnected, but I’m not sure now. Rather sleep-deprived.

In any case I’m thinking it’s either a case of the IC pin using the transistor to pull the connector pin low, or more likely now that it’s actually a 5v output and my multimeter detected it at only 4.3v due to the duty cycle of the HD pulse. The HD pulse presumably would be something to sync with the video or on-screen text display. But it seems to display PAL video with no problem when it’s not in use, so unsure.

Really I’d just like it if someone can put my mind at ease on the subject. It doesn’t seem essential, but I’d like to know what it’s supposed to do.

Mirrored from The blog-hub for Peter "Sci" Turpin.

sci_starborne: Sign of the Fox (Default)
Friday, July 20th, 2012 01:00 am

Mirrored from The blog-hub for Peter "Sci" Turpin.

Tags:
sci_starborne: Sign of the Fox (Default)
Thursday, July 19th, 2012 01:00 am

Mirrored from The blog-hub for Peter "Sci" Turpin.

Tags: